ONE PAS, INC.: SMT

Click To Enlarge

Introducing the OP1560B ONE PASSircuit^TM surface mount / through hole prototyping board from ONE PAS, INC. This board has all of the features of the Patented OP840B ONE PASSircuit^TM through hole board plus surface mount locations for SOP, SOIC and our new Patent Pending ONE PASSOT23^TM universal SOT23 mounting location that holds 3, 4, 5 and 6 pin devices.

The revolutionary design of these boards allow faster, cleaner building of complex circuits in half the space and with less jumpers than any other prototyping system available. You can incorporate power supply, crystals & clocks, pots, RC and feedback networks and all of your discrete active devices on the same board without any loss of IC space.

This board contains a system of offset traces that allow signals to flow through placements of other parts thus removing the need for jumpers in many cases. It further creates a Patented four pin socket array that can be used for mounting 3 pin devices that can be turned 360 degrees to avoid crossing signals. Some of these sockets have one connection on the power bus allowing direct power connection for switching devices, removing even more jumpers.

The new ONE PASSOT23^TM is a unique eight pad location that is placed inside the four pin sockets with additional traces offset and running between the existing traces. This allows placement of SOT23-3, 4, 5 and 6 pin devices to also be turned 360 degrees giving surface mount the same functionality as through hole.

In the IC area traces are spaced at 0.05" to allow surface mounting of ICs. The elongated surface mount pads will hold SOP (thin frame) or SOIC ( wide frame) devices. Every other pad has a through hole pad in it's center allowing 0.3" dip placement with a free trace running between each pin. All of the traces are offset from each other and terminate in a continuous Patented four pin socket array allowing interconnection of signals using short jumpers between the IC pins. 0.6" ICs can be mounted in the through hole area just outside of the surface mount pads.

Imagine, one small board that can hold 0.6" & 0.3" DIPs and SOP & SOIC surface mount and SOT23-3, 4, 5 & 6 pin and TO92 & TO218 & TO220 and all of your passive devices at the same time! But wait, it doesn't end there. There are also areas for single and dual row headers or RJ11 & RJ45 connectors, four corner mounting holes for chassis mount and the board fits in a standard 3" x 6" plastic project case available from Radio Shack. The OP1560B from ONE PAS, INC. is made of UL approved, fiberglass reinforced, dual sided, 1 oz. copper plated material. It is plated through, solder masked and pre-tinned to aid soldering. These are professional grade prototyping tools at hobby prices.

To the left is a Layout Template in x2 expanded view .pdf file with top and bottom layers merged as if a single sided board. It is printer ready for 8.5" x 11" landscape format worksheet to use as a design tool for building circuits on this board.

$9.95 Qty 1 - 4
$9.00 Qty 5 - 9
$8.50 Qty 10 - 19
$8.00 20 or more

ONE PAS, INC. P. O. Box 108 Woodstock, IL 60098-0108